Lighting Control Product:  6122 solo® Busch Watchdog 180 flush mounted comfort sensor II with multilens For ABB i-bus(R) EIB/KNX devices 6120 U-102, 6109 U, 6110 U-101, 6114 U and ABB Powernet EIB/KNX devices 6920 U-10x, 6931 U-10x, 6932 U-10x, 6933 U. Surface painted Product:  6197/11-102-500 Control module 2gang 6197/11-102 For Busch Universal Dimmer(R) 6583. Interface device between ABB i-bus(R) EIB/KNX and up to 2 Busch Dimmers(R) (dimmer groups) 6583 (max. 9 pce. per group) 2 inputs: 230 V , 50 Hz As binary inputs or for "local operation" using conventional push button (2 Product:  DG/S1.1 DALI Gateway, 1-fold, MDRC For controlling DALI devices via the ABB i-bus®. Up to 128 DALI Slaves are addressable. 64 DALI slaves can individually and directly switched and dimmed. Additional 64 DALI devices are controlled in broadcast mode. Product:  DG/S1.16.1 DALI Gateway, 1fold, 16 Groups, MDRC For controlling DALI devices via the ABB i-bus®. Up to 64 DALI Slaves are addressable. The control and status feedback happens via KNX with 16 lighting groups. 14 scenes, slave-, staircase- and sequencer- function are integrated. Product:  DG/S8.1 DALI-Gateway, 8-fold, MDRC For controlling DALI devices (electronic ballasts, transformers etc.) via the ABB i-bus®. 8 separate output channels, each with up to 16 DALI devices. The addressing or commissioning of the DALI devices is not necessary. Product:  DSA/S2.16.1 DALI Switch Actuator, 2-fold, 16 A, MDRC Switch Actuator, 2-fold, 16AX, C-Load with DALI interface. Potential free contacts to switch 2 independent electrical loads via DALI control (Digital Addressable Lighting Interface). Manual operation and display of the switching state of the contacts. Product:  LF/U2.1 Light Sensor, FM The light sensor is used to measure the brightness level in rooms. When combined with the light controller LR/S x.16.1 (x = 2 or 4) the light sensor is used for constant light control. Product:  LR/S2.16.1 Light Controller, 2-fold, 1-10V, MDRC Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 – 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control. Product:  LR/S4.16.1 Light Controller, 4-fold, 1-10V, MDRC Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 – 10 V control input). When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol. Product:  SD/S2.16.1 Switch-/Dim Actuator, 2-fold, 16A, MDRC MDRC Device for switching (16A-AC1) and dimming of 2 independent groups of luminaries with elect. Ballasts and 1-10V control inputs, via the ABB i-bus®. Manual and visual operation. A power supply is not necessary. Product:  SD/S4.16.1 Switch-/Dim Actuator, 4-fold, 16A, MDRC MDRC Device for switching (16A-AC1) and dimming of 4 independent groups of luminaries with elect. Ballasts and 1-10V control inputs, via the ABB i-bus®. Manual and visual operation. A power supply is not necessary. Product:  SD/S8.16.1 Switch-/Dim Actuator, 8-fold, 16A, MDRC MDRC Device for switching (16A-AC1) and dimming of 8 independent groups of luminaries with elect. Ballasts and 1-10V control inputs, via the ABB i-bus®. Manual and visual operation. A power supply is not necessary. Product:  UD/S2.300.2 Universal Dim Actuator, 2-fold, 300VA, MDRC For switching and dimming incandescent lamps, 230 V halogen lamps or low-voltage halogen lamps powered by wound or electronic transformers. Automatic load detection. Full output power up to 45 °C ambient temperature. Product:  SA/S12.10.1 Switch Actuator, 12-fold, 10A, MDRC Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669. Product:  SA/S8.10.1 Switch Actuator, 8-fold, 10A, MDRC Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669. Product:  SA/S4.10.1 Switch Actuator, 4-fold, 10A, MDRC Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669. Product:  SA/S2.10.1 Switch Actuator, 2-fold, 10A, MDRC Uses potential free contacts to switch 2 independent electrical loads via the ABB i-bus®. Manual and visual operation. The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669. Product:  SA/S8.16.5S Switch Actuator, 8fold, 16A, C-Load, Current Detection, MDRC Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus®. Load current detection, manual and visual operation. The 16AX-AC3 (C-load) device is especially suited for loads with high surge currents e.g. flourescent lighting. Product:  6323 Busch-triton® Switch Sensor, 3-fold , IR ,Display Busch triton(R) With window. For Busch Installation Bus(R) EIB/KNX devices 6120 U-10x, 6110 U-10x, 6114 U and Busch Powernet(R) EIB/KNX devices 6920 U-10x, 6931 U-10x, 6932 U-10x, 6933 U. Universal control cover with IR reception and display Product:  6325 Busch-triton® Switch Sensor, 5-fold , IR, Display Busch triton(R) With window. For Busch Installation Bus(R) EIB/KNX devices 6120 U-10x, 6110 U-10x, 6114 U and Busch Powernet(R) EIB/KNX devices 6920 U-10x, 6931 U-10x, 6932 U-10x, 6933 U. Universal control cover with IR reception and display Product:  US/U2.2 Universal Interface, 2-fold, FM The Universal Interface has 2 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons, auxiliary contacts, LEDs and electronic relays ER/U 1.1. Requires ETS2 V1.2a. Product:  6136/30M-101-500 LEANtouch Panel freely programmable EIB touch display as room-integrated controlling, signalling and regulating unit. Can be combined with various design styling frames made of genuine materials. For displaying and operating up to 80 EIB standard functions (switching, di Product:  6136/10-500 Cover Frame,LEANtouch Panel(R)/SMARTtouch Panel,black,chrome Design styling frame for 6136/30M-xxx, 6136/100M-xxx, 6136/100C-xxx, 6136/100CB-xxx, 6936/30M-xxx, 6936/100M-xxx, 6936/100C-xxx, 6936/100CB-xxx. Materials: black glass with chrome door. Product:  6136/11-500 Cover Frame,LEANtouch Panel(R)/SMARTtouch Panel,black,aluminium Design styling frame for 6136/30M-xxx, 6136/100M-xxx, 6136/100C-xxx, 6136/100CB-xxx, 6936/30M-xxx, 6936/100M-xxx, 6936/100C-xxx, 6936/100CB-xxx. Genuine materials: black glass with aluminium door. Product:  6136/13-500 Cover Frame,LEANtouch Panel(R)/SMARTtouch Panel,white,aluminium Design styling frame for 6136/30M-xxx, 6136/100M-xxx, 6136/100C-xxx, 6136/100CB-xxx, 6936/30M-xxx, 6936/100M-xxx, 6936/100C-xxx, 6936/100CB-xxx. Genuine materials: white glass with aluminium door.